How to calibrate the TCA Quadrant Boeing Edition

Products: TCA Quadrant Boeing Edition ; TCA Yoke Pack Boeing Edition



Platforms:
PC running Windows® 10 or more recent.
Game consoles: Xbox Series S™; Xbox Series X™

This article shows you how to manually calibrate the TCA Quadrant Boeing Edition.
Calibration allows you to revalidate the minimum and maximum physical values of the axes in the internal memory of your TCA Quadrant Boeing Edition. This will allow you to optimize the coordination of your device (hardware) with the information received and applied in the game (software).

Note:
The calibration will be saved in the device and can be done by connecting the TCA Quadrant Boeing Edition to a PC, the TCA Yoke Boeing Edition or an Xbox console.

To calibrate with a PC, two connection methods are possible (your choice):
- Method 1: Connect the TCA Quadrant Boeing Edition directly to a PC USB port.

- Method 2: Connect the TCA Quadrant Boeing Edition directly to the USB port located at the back of the TCA Yoke Boeing Edition.

To calibrate with an Xbox console, a connection method is recommended:
- Recommended Method: We recommend connecting the TCA Quadrant Boeing Edition directly to the USB port at the back of the TCA Yoke Boeing Edition.

- Alternative method: You can also connect the TCA Quadrant Boeing Edition directly to a USB port on the Xbox console*.
* Warning: Connecting the TCA Quadrant Boeing Edition to a USB port on an Xbox console only works to perform calibration. This connection method will not work in game.


Important :
We recommend that you directly connect the TCA Quadrant Boeing Edition to a USB port on the PC, TCA Yoke Boeing Edition or Xbox console with its USB-C / USB-A cable.
- We recommend that you avoid using a USB hub, USB extender or any plug-in extensions.


1) To get started, the TCA Quadrant Boeing Edition must be disconnected from the USB of the PC, TCA Yoke Boeing Edition or Xbox console

- The TCA Quadrant Boeing Edition must be unplugged.

- The PC or Xbox console must be turned on.

- If you proceed with connection to the base of the TCA Yoke Boeing Edition: The TCA Yoke Boeing Edition must already be connected to the PC or Xbox console.


2) Make sure the levers are in the minimum position.

- Pull back all three levers to their minimum position, firmly and without forcing.



- Then leave them in this position and release them.


3) Press and hold the calibration button

Important: do not touch any lever! All axes of the TCA Quadrant Boeing Edition must be released when starting the calibration.

- The calibration button is in the upper left row of the Quadrant panel.




4) Connect the TCA Quadrant Boeing Edition to the USB port of your PC, TCA Yoke Boeing Edition or your Xbox console while holding the calibration button

- Wait about 2 seconds then release the calibration button.


5) Forward the levers to validate their values

- Forward the three levers to their maximum position, firmly and without forcing.



- Leave them in this position and release them.


6) Simultaneously press the calibration button and the button located on the upper right row of the panel to complete the calibration

Important: make sure all levers are released! All axes must be released at the time of final validation.




You are ready to play!


Article that may be useful to you:
How to calibrate the TCA Yoke Boeing Edition