TMX : the gas pedal does not work, my TMX is stuck in inverted mode

Products: TMX Force Feedback ; TMX Pro Force Feedback




This can happen with a T3PA, T2PA, T3PM, or T-LCM pedal set connected to the TMX Force Feedback via the RJ12 connector. The gas pedal does not work and the MODE button LED remains green (inverted mode).

Try reversing the mode by pressing and holding the MODE button for 2 seconds.
This process is detailed in our article: Normal / inverted pedal Mode: gas pedal no longer responds

If the MODE button LED remains green, you can try resetting the normal/inverted mode:
- Keep your TMX connected to your PC or Xbox console.
- Disconnect the pedal set: the MODE button will turn red again
- Press and hold the MODE button for 3 seconds (the color will remain red), then release the button.                                                                                                                                                           
- Reconnect the pedal set to the racing wheel base: the MODE button LED will turn green again.
- Press and hold the MODE button for 2 to 3 seconds: the MODE button LED will turn red again.
- TMX is in normal mode.


Back to Help Center – Pedal sets