My Thrustmaster racing wheel is recognized with a generic name or the shape of a standard wheel
- KB : 1780
- Language : EN
- Date : 2024-06-15
- Category :
- Tag :
- Formula Wheel Add-On Ferrari SF1000 Edition
- FERRARI 488 GT3 WHEEL ADD-ON
- T300 SERVO BASE
- TX SERVO BASE
- T-GT II
- TS-PC RACER
- TS-XW SERVO BASE (STAND ALONE)
- T-GT
- T300 Ferrari GTE
- T300 Ferrari Integral Alcantara® Edition
- T300 RS
- T300RS GT Edition
- TS-PC Racer Ferrari 488 Challenge Edition
- TS-XW RACER
- TX Racing Wheel Ferrari 458 Italia Edition
- TX Racing Wheel LEATHER Edition
Product: Formula Wheel Add-On Ferrari SF1000 Edition ; FERRARI 488 GT3 WHEEL ADD-ON ; EVO RACING HUB ; EVO RACING 32R LEATHER
System requirements: PC running Windows® 10 or more recent.
Thrustmaster new generation wheel add-ons* are now recognized through a standard protocol by Thrustmaster dual-belt servo bases.
On PC, the servo bases mounted with these new wheel add-ons are recognized with the name Thrustmaster Advanced Mode Racer.
* Formula Wheel Add-On Ferrari SF1000 Edition ; Ferrari 488 GT3 wheel add-on ; Evo Racing HUB ; Evo Racing 32R Leather, ...
Note:
Older Thrustmaster wheel add-on models (those released before the models referenced in this article) still allow the name of the servo base to be displayed on PC and the steering wheel image to be shown in the control panel.
Important note regarding servo bases:
It is necessary that your PC has the latest "PC - DRIVERS FORCE FEEDBACK" driver installed and that your Thrustmaster servo base has its latest firmware (for PC and game consoles) in order to fully support your wheel add-on.
If necessary, the driver and the firmware update procedure are available on your servo base page.
Concerned servo bases:
T300 Servo Base ; T-GT II ; T-GT
TX Servo Base ; TS-XW Servo Base
TS-PC Racer
Important note:
The T818 is not affected by the display variations between the servo base and the wheel add-ons presented in this article.
Below we show the example of a TS-PC Racer equipped with a Formula Wheel Add-On Ferrari SF1000 Edition (the display will be identical for newer wheel add-on models).
1. Open the control panel
Connect your Thrustmaster racing wheel to the USB port on your PC, wait a few seconds then follow the instructions:
- On your keyboard, simultaneously press the Windows and R keys
- The Run window appears: type joy.cpl then click OK
.
- Select the name Thrustmaster Advanced Mode Racer then click Properties
2. View your racing wheel and its wheel add-on in the control panel
The new generation Thrustmaster wheel add-on (in this example a Formula Wheel Add-On Ferrari SF1000 Edition) appears in the shape of a standard steering wheel.